Detailed Product Description

HY Thicker Sheet Vacuum Forming Machine Working cycle: carry material by hand, clamp, heating, blown, forming, cooling, lower-mold replace, mold unload, unload the product by hand.

Basic units:
1) Heater adopts ceramic heating bricks
2) Heater drives by cylinder to insure heater work fleetly and placidly
3) Clamp unit, controlled by pneumatic electromagnetic valve. Clamping unit
assembled synchronous unit for material pressing. This machine adopts iron
clamp bracket, which can bear high temperature, avoid the clamp bracket
metamorphosed and adjust width and length arbitrarily
4) Complete vacuum system includes vacuum room, vacuum pump, vacuum
storage gas pot, vacuum pipeline, adjustable air cleaner device and vacuum
controlling unit
5) Cooling system assemble air blower and spray gun. The direction of air blow an
spray gun could be adjusted according to different products making
6) Automatic degassing before mold unload

Excellence of equipment:
1) Heater (controlled separately)
a) Heater separately: set different temperature according material forming
demand to insure product quality. The temperature and the voltage adopt
dig-display voltmeter, which can realize temperature and the voltage
adjustment and improve temperature and save temperature
b) Change the heater units fleetly. And it is economical for maintain because
it only need change part units
2) Controlling the heater unit separately can short the heating time and
economize energy and improve product quality and reduce cost
3) Adjustable frame: The side size clamping is 20 - 50mm which can economize
the material. The total of economized material is a considerable amount

Packing:
Wooden packing